Two-Way Loudspeaker
System Utilizing
Horn-Loaded Midrange
VS2210-9
Venue Series
Key Features:
᭤ Two-Way Mid-high Design, with horn-
loaded midrange for 90° x 50° pattern
control to 500 Hz
᭤ Very High Peak Output capability
᭤ Trapezoidal enclosure for easy cluster
arrangements
᭤ DuraFlex finish, tough, weather resistant
and paintable
᭤ 12 Suspension points (M10 Thread)
The model VS2210-9 is a mid-high boxed
system that provides maximum SPL, all in a
single compact package that can be
configured with other Venue Series systems.
With nominal 90° coverage pattern, systems
can be splayed together for increased
coverage and/or SPL requirements. A newly
designed 10" cone midrange driver loads the
waveguide midrange horn, extending pattern
control and giving exceptional clarity and
TM
Specifications:
projection. The proven Optimized Aperture
System:
HF horn completes this unique design.
The VS2210-9 is designed for bi-amplified
use only, utilizing the DSC260 digital
controller for crossover, signal alignment and
equalization functions, provides optimum
system performance. Additional equalization
in the DSC260 is user adjustable for room
tunings.
Freq. Range (-10 dB): 230 Hz - 17 kHz
Freq. Response (-3 dB): 280 Hz - 16 kHz
Horz. Coverage Angle (-6 dB): 85° averaged 500 Hz to 16 kHz
Vert. Coverage Angle (-6 dB): 50° averaged 500 Hz to 16 kHz
Directivity Factor (Q): 10.0 averaged 500 Hz to 16 kHz
Directivity Index (DI): 10.0 dB averaged 500 Hz to 16 kHz
Recommended Controller: DSC260
Transducers:
Mid-Frequency: 2012H; 254 mm (10 in) dia., 76 mm (3 in)
edgewound ribbon voice coil
The VS2210-9 is part of the JBL Venue
Series, a family of modular loudspeaker
systems designed for fixed installation
applications ranging from speech
Nominal Impedance: 8 Ohms
Input Power Rating: 250 W, AES; 1000 W Peak
1
Sensitivity : 106 dB, 1 W @ 1m (3.3 ft)
Calculated Maximum SPL: 136 dB, @ 1 m (3.3 ft)
Recommended Amplifier : 600 W
reinforcement to large scale music
2
productions. All models are fitted with
suspension points that accept M10 threads.
The enclosures are coated with a hard
wearing, weather resistant, textured finish
DuraFlex. Premium 13 ply wood and an 18
gauge steel, foam backed grille enable the
Venue Series system to comply with
environmental test specifications.
High-Frequency: 2447J; 100 mm (4") diaphragm and voice coil dia.,
38 mm (1.5") throat dia.
Nominal Impedance: 16 Ohms
Input Power Rating: 75 W, AES; 300 W Peak
1
Sensitivity : 111 dB, 1 W, @ 1 m (3.3 ft)
Calculated Maximum SPL: 136 dB, @ 1 m (3.3 ft)
2
Recommended Amplifier : 200 W
Physical:
Enclosure: Trapezoidal, 22.5° side angles, birch plywood
Environmental Specifications: Mil-Std 810, IPX4 per IEC 529
Suspension Attachment: 12 points; accepts M10 threaded hardware
Finish: Black DuraFlex coating
Components:
The VS2210-9 utilizes the 2012H, a new 10"
cone driver designed specifically for loading
into the midrange horn, covering the mid-
frequency range. The transducer is rear
Grille: Black powder coated zinc treated 18 gauge
perforated steel grille with foam backing
Input Connectors: 2 x NL8 Neutrik Speakon connectors
Dimensions: 759 mm x 572 mm x 572 mm (29.88 in x 22.50 in
x 22.50 in)
TM
loaded with Thermal Transfer chamber for
maximum efficiency.
Net Weight: 41.3 kg (91 lbs.)
The 38mm (1.5 in) exit 2447J large format
compression driver is coupled to an
1
Measured on-axis in the far field with 1 watt (2.83 V RMS @ 8 ohms or 4.0 V RMS @ 16 ohms) input and referenced to
1 meter distance using the inverse square law. Listed sound pressure represents an average from 300 Hz to 16 kHz.
®
2
Optimized Aperture Bi-Radial horn providing
Recommended Amplifier is a power capability value that should be taken as a guide.
smooth even coverage. The Optimized
Aperture horn provides lower throat
distortion than its earlier predecessors while
extending frequency response to nearly
20 kHz.
JBL continually engages in research related to product improvement. New materials, production methods, and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this
reason, any current JBL product may differ in some respect from its published description, but will always equal or
exceed the original design specifications unless otherwise stated.
Horizontal 1/3 Octave Polars
᭤ VS2210-9 2 way System
Vertical 1/3 Octave Polars
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
SS VS2210-9
CRP 15M
1/98
A Harman International Company
|